PDA

View Full Version : ET 3.00 - Server



Paul
22-08-2013, 15:07
As requested we now have a seperate topic for our ET 3.00 server version. More information regarding this ET server version can be found at this link: http://filebase.trackbase.net/et/server/.

Any feature requests, support and questions can go in here.

If you want to whitelist your server to use the TSP rating - ask on Discord or send a PM.

relic
22-08-2013, 16:16
awsome.. we very happy with 0.7.1 version we running and the work being done by TB.

Dookie
22-08-2013, 20:35
True that relic, and very nice to see the thread only about et 3.00, love the silent guid fix in 0.7.1, keep up the good work.

TitaN655
23-08-2015, 14:53
A bug report here. Not sure if this is a problem with ETJump or ET 3.00 but on the ETJump forums, it appears to be a problem with ET3.00.

If you don't know, in Trickjump there is ice ramps which players use to launch themselves higher. In ETJump, when running ET2.60b these ice ramps work as they should; you jump onto the ramp and you smoothly launch upwards without loosing any speed. When ETJump is running ET3.00 however, a lot of speed is lost; when you stand on the ice ramp and don't jump on it, you appear to get stuck to it and your view starts shacking. When jumping on it, you don't get stuck to it but you loose a lot of speed because of it, which makes some maps almost impossible.

This problem is not only restricted to our server, but also every ETJump server as far as i know, and from the experiences told by the regular players of these other servers.

DRi*VJ*
23-08-2015, 19:59
A bug report here. Not sure if this is a problem with ETJump or ET 3.00 but on the ETJump forums, it appears to be a problem with ET3.00.

If you don't know, in Trickjump there is ice ramps which players use to launch themselves higher. In ETJump, when running ET2.60b these ice ramps work as they should; you jump onto the ramp and you smoothly launch upwards without loosing any speed. When ETJump is running ET3.00 however, a lot of speed is lost; when you stand on the ice ramp and don't jump on it, you appear to get stuck to it and your view starts shacking. When jumping on it, you don't get stuck to it but you loose a lot of speed because of it, which makes some maps almost impossible.

This problem is not only restricted to our server, but also every ETJump server as far as i know, and from the experiences told by the regular players of these other servers.

Alright thanks for the report we'll look into it asap! ( could you also let me know what version of ET 3.00 - 0.7.*

Regards, VJ*

TitaN655
23-08-2015, 22:04
Alright thanks for the report we'll look into it asap! ( could you also let me know what version of ET 3.00 - 0.7.*

Regards, VJ*

It's the latest version (0.7.4). I'm happy to say I haven't found any other bugs. :D

Boosted
20-09-2015, 16:02
Hi there.
Just "installed" et 3.00 (0.7.4) onto my Server, but sadly i have Issues.
When connecting from a 2.60b Client, all works fine.
But when i connect from a 2.55 Client it says "Cannot load official Pak File"...but that only happens on my Server!
When i connect with 2.55 to another Server running 3.00 it all works fine and i can join the Server.
Above Message is shown when trying to connect to the Jaymod Server, when trying to connect to the silEnT Server i get dc'ed as well but i only see an empty Window popping up.
Im kinda puzzled.
Imo it cant be the Client, since it connects fine to other 3.00 Servers, but the Question iss, whats causing that?
Did i miss something?
Here is my startup script:

etded +set dedicated 2 +set net_port 27000 +set net_port_extra 27001 +set com_hunkmegs 1024 +set fs_game jaymod +set sv_autoUpdate 1 +set fs_homepath /usr/local/games/enemy-territory/ +exec server.cfg +exec objectivecycle.cfg

Any Ideas? :)

JoNny
20-09-2015, 18:23
Hey Boosted,

what does your etmain folder look like? The official pak file error is usually connected to pak0.pk3 or in some cases to pak1.pk3 / pak2.pk3.
You don't have to attach screenshot here in public but can send me one by private message if you want.

/JoNny

Boosted
20-09-2015, 20:10
Hey Boosted,

what does your etmain folder look like? The official pak file error is usually connected to pak0.pk3 or in some cases to pak1.pk3 / pak2.pk3.
You don't have to attach screenshot here in public but can send me one by private message if you want.

/JoNny

I do use a 2.60b install with a Version Switcher.
Also tried to do it manually (rename pak1, pak2 and mp_bin) but both wont help.
And like i said, i can connect to other 3.00 Servers just fine...only not to my Servers.
It all works fine unless i try to join either my Jaymod or silEnT.

//EDIT: If you have a 2.55 Install at Hand, i can send you the IP and you can give it a Shot.

JoNny
20-09-2015, 21:16
I was meaning the etmain folder of your server. :)

/JoNny

Boosted
21-09-2015, 18:53
Oh. my Bad :)
In there i also have mp_bin and pak0-2.
Since its running 2.60b.
Do i need to remove/rename these?

//EDIT: Just tried and that did the Trick.
Now i can connect from both 2.55 and 2.60b.
Would be good to have that in the Manual :D
Other Question tho - those paks do have the Fixes inside...does that mean that my Server basically now runs 2.55 or does the binary include Serverside Fixes?

ETc|#.Jay.#
22-09-2015, 18:41
that pk3´s you need only if you run etmain mod (mp_bin.pk3). And in pak1.pk3 are only map.script and menu fixes inside. Same for pak2.pk3.

I deleted in etmain all files except pak0.pk3 and map pk3´s and cfgs maybe.

JoNny
22-09-2015, 20:15
Indeed, you need to remove pak1 and pak2 and mp_bin in order to run 2.55+ on your server.
The etded file contains a lot fixes as it is the ET 3.00 server version.

By the way, it is not connected to ET 3.00 that you need to remove the pak1/2, mp_bin files. You could find the instructions to setting up an ET 2.55+ server on the internet.

/JoNny

nooob
24-12-2015, 15:40
Where should I install these et3.00 file to the server? in the etmain folder?

JoNny
24-12-2015, 16:26
Hey nooob,

no, but the folder above.

-wolfet
-> HERE COMES YOUR FILE
----etmain
----modfolder
----pb
----botfolder
----docs

So basically in the main directory, where your etded.x86 file usually is.

/JoNny

nooob
8-01-2016, 10:53
Which version do I need on the server? 2.55,2.55+ or 2.60b ?
I have 2.60b installed but not work :(

JoNny
8-01-2016, 17:04
Hey noob,

what exactly doesn't work?
It's up to you which server version you want to set up. Since you are posting in the et300 thread and I usually advise to use ET 3.00 - as it's the latest version - you could set up ET 3.00.

As to your question: 2.60b is fine.

Default the game runs on 2.60b protocol 84 while accepting also legacy 2.55 clients.

/JoNny

ETc|#.Jay.#
3-04-2017, 01:54
my server is not able to get tsp rating. What can be wrong?
I use the latest et300. port 4444 and 4445 are open.
http://et.trackbase.net/server/etc
at version it shows 2.60b, at other servers it shows 2.55/2.60b

this are my start parameters

+set vm_game 0 +set net_ip 37.114.96.119 +set net_port 27960 +set net_port_extra 27980 +set fs_game nitmod +exec server.cfg +map goldrush +set sv_autoUpdate 1 +set ttycon 0

ETc|#.Jay.#
11-05-2017, 11:39
uhm. i still have the problem.

ETc|#.Jay.#
13-05-2017, 15:06
this happens too. link to my playername server activities http://et.trackbase.net/?mod=playerinfo&idx=9423&show=server

ETc|#.Jay.#
4-06-2017, 14:20
now all 5 servers showing as offline :/ -> http://et.trackbase.net/clan/27/

this is at bottom on each server
Lastscan: 9h » Nextscan: -35169 s






ping works
root:~# ping trackbase.net
PING trackbase.net (91.220.53.120) 56(84) bytes of data.
64 bytes from 91.220.53.120: icmp_seq=1 ttl=55 time=9.15 ms
64 bytes from 91.220.53.120: icmp_seq=2 ttl=55 time=9.23 ms
64 bytes from 91.220.53.120: icmp_seq=3 ttl=55 time=9.15 ms
64 bytes from 91.220.53.120: icmp_seq=4 ttl=55 time=9.07 ms
64 bytes from 91.220.53.120: icmp_seq=5 ttl=55 time=9.17 ms
64 bytes from 91.220.53.120: icmp_seq=6 ttl=55 time=9.10 ms
64 bytes from 91.220.53.120: icmp_seq=7 ttl=55 time=9.42 ms
64 bytes from 91.220.53.120: icmp_seq=8 ttl=55 time=9.04 ms
64 bytes from 91.220.53.120: icmp_seq=9 ttl=55 time=9.23 ms

ETc|#.Jay.#
26-12-2017, 20:06
my server is not able to get tsp rating. What can be wrong?
I use the latest et300. port 4444 and 4445 are open.
http://et.trackbase.net/server/etc
at version it shows 2.60b, at other servers it shows 2.55/2.60b


i know a little bit more now.
If you remove and disable omnibot from your etserver, then its back showing 2.55/2.60b.
Rating is back too.

GUNDAM
24-05-2018, 07:56
hello
I'm a Gundam server administrator
It is not possible to check the server in the list
http://et.trackbase.net/server/gundam
http://et.trackbase.net/server/46241/
please confirm.
Thank you very much
I am grateful.

JoNny
24-05-2018, 21:09
hello
I'm a Gundam server administrator
It is not possible to check the server in the list
http://et.trackbase.net/server/gundam
http://et.trackbase.net/server/46241/
please confirm.
Thank you very much
I am grateful.

That's done.

/JoNny

[DIABOLIK]$mart
28-01-2023, 11:06
Hello

I can't find how to enable 'chat2server' feature ? My server use 3.0 and my profile is Premium.
Thanks in advance

JoNny
28-01-2023, 11:21
$mart;30248']Hello

I can't find how to enable 'chat2server' feature ? My server use 3.0 and my profile is Premium.
Thanks in advance

Hello,

the documentation can be found here: https://filebase.trackbase.net/et/server/


You can enable the chat relay by setting:

set sv_chatRelay "1" // 1 ENABLES IT, DEFAULT = 0

If it still does not work, please get back in touch with me.

/JoNny

[DIABOLIK]$mart
29-01-2023, 20:42
Thanks man, I'll try it

[DIABOLIK]$mart
30-01-2023, 11:08
Ok, I've enabled it, and restart server :
11:05:35 "sv_chatRelay" is:"1^7" default:"0^7"
But nothing on the page after a tchat speaking:
https://et.trackbase.net/server/47992/chat/
Is it supposed to 'grep' something in server log side ?

JoNny
30-01-2023, 16:12
$mart;30254']Ok, I've enabled it, and restart server :
11:05:35 "sv_chatRelay" is:"1^7" default:"0^7"
But nothing on the page after a tchat speaking:
https://et.trackbase.net/server/47992/chat/
Is it supposed to 'grep' something in server log side ?

I have restarted a service and added you as the server admin to that server. You should definitely be able to send messages now to your server from TrackBase. Please check this. Also, messages on your server (public messages) should appear on that link. If not, I'm happy to further investigate.

/JoNny

[DIABOLIK]$mart
31-01-2023, 08:07
Thanks a lot, I will PM you

GUNDAM
3-06-2023, 03:11
I'm running ET Legacy with nitmod on linux,
"ET 3.00 Server Addon" only works with "linux-i386".
Could you please distribute a version that can boot even with "linux-x86_64"?
Thank you.